AREVA logo

Extracting natural uranium ore

Photograph of the underground mine at McArthur River (Canada)

Having passed all the technical and economic feasibility tests, uranium ore can be mined depending on the deposit's characteristics, using an open-pit mine (quarries), an underground mine or by in-situ recovery. This latter technique is most often used for low or very low concentration mineralization. Ore can therefore be extracted from some deposits which are a priori unexploitable by traditional techniques.

Three operating configurations

To extract uranium, it is necessary to access the deposit. This is done by:

  • removing the rock covering shallow deposits lying at a depth of less than 150 meters, in the case of open-pit mining,
  • penetrating tunnels where the ore is located at a depth, as is the case with underground mines,
  • by borehole mining, involving the injection of a leaching solution into the deposit to dissolve the uranium. The production solution that solubilized the uranium is then pumped out to extract the uranium. This is known as in-situ recovery. This method is used for low-grade deposits located in sandy layers between impermeable clay layers. The only deposit mined in this way is in Kazakhstan.

Open-pit uranium mines offer the advantage of easy access to the ore: the techniques and machinery used are similar to those used in quarries or on public works sites. These mines can reach a depth of several hundred meters.

Depending on the amount of ore in the ground and its uranium concentration, a mine can be operated for 10 to 50 years.


Extraction: open-pit mine, for shallow deposits


Extraction : conventional underground mine, for deeper deposits

Innovative techniques

New AREVA's mining experts regularly test and implement innovative techniques. These improve the performance of existing operations.

The concentration of some Canadian deposits (up to 200 kilograms of uranium per metric ton of ore, as opposed to 10 kilograms elsewhere) has necessitated the implementation of special procedures. An original method of hydraulic mining was developed for the operation of the Cigar Lake deposit. The ground is frozen using a coolant that circulates in buried pipes. A high-pressure jet of water crumbles the frozen rock, and the ore mixed with water is collected and pumped outside the production zone. Extraction is carried out in a fully automated fashion, and no miners are in contact with this extremely rich ore.


Extraction : jet boring, a hydraulic system for mining high-grade deposits

Staff protection

The operation of uranium mines can present health risks for miners through the inhalation of radon, a rare gas produced through the disintegration of uranium, along with dust. Effective protection measures reduce these risks: spraying systems cut down on dust, and heavy ventilation is constantly in operation, mainly in underground mining.

In some highly concentrated deposits, operations are performed by remote control, thereby avoiding staff contact with operating zones.


Extraction in situ recovery (ISR)